Brother VC500W Stand and Tub

This is a Brother VC500W Stand and Tub.

There is a longer and a smaller versiion of the tub.

You need:

2 3x10mm magnets for the tub

2 3x12mm magnets for the stand

For the bottom you need TPU Feet.

They need to be glued in the holes on the parts.

Print Option:

For Tub and Stand:

Bambu Lab PLA

15% Infill

For TPU Feet:

TPU

100% Infill

Supports are needed on the bottom where the door seal stripes are glued on

If you have any questions, feel free to ask.