- Spacers for top drawer, designed by canomad are available here: [printables](https://www.printables.com/pl/model/712460).
- Dimensions of the drawer: 462x316
- This fits 11 squares vertically without the need of using filler.
- This fits 7 squares horizontally with presented supports on the right side.
- In my drawer I used Gridfinity Refined Lite Bases https://www.printables.com/pl/model/413761-gridfinity-refined/files. Specifically I used 6x4 + 6x3 + 5x4 + 5x3 bases and connected them together, but they meet the standard so the fillers should fit any other Gridfinity base.
- Height of the spacers: 3mm (you may adjust to your baseplates for better UX)
- You have to print one Filler 1, one Filler 2 and two Filler 3s. (On picture my drawer consists of two different rectangular fillers instead of two 3s, changed the project as they wouldn't fit on the smaller beds)
- One of the curvature radiuses of Filler 1 are not perfectly matching the drawer, nonetheless it still fits pretty nicely. Feel free to mess around with Fusion project in case you wanted to improve it.
- Included both separate STLs for each filler, Autodesk Fusion 360 files as well as Bambu Studio project file.
- Printing:
- Used printer: Bambu Lab A1 Combo
- Nozzle: 0.4 mm Stainless Steel
- Plate: PEI Plate
- Nozzle Temperature: 220 C
- Heated Bed Temperature: 65 C
- Material: Generic Black PLA
- Bambu Studio preset: 0.20 mm Standard @BBL A1
- Print time: 1h
- Used Filament: 33.63 g
- It is my first published project, so I'd appreciate all the suggestions and criticism.
Tags
The author marked this model as their own original creation.