Protective Shell for the 2023 65W USB-C Laptop charger
This charger came with my Yoga 16ARP8 laptop and since I don't like my chargers to be all scratched I made this shell.
The charger itself likes to heat up (like any charger I guess) so I printed it out of PETG because of the very slightly higher thermal conductivity. I opened it up anyways.
Enjoy! I'm just starting on this 3dprinting and engineering stuff :)
Printing recommendations: Print with the long side up. Enable 'Tree Thin' supports.
My Print Settings:
Printer: Bambulab A1 Mini
Slicer: Orca Slicer
Filament: Generic PETG 16mm/s^2
Nozzle: 0.4mm
Layer Height: 0.28mm
Brim: No (If you don't trust your printer, enable it. I recommend a separation of 0.2 or 0.3 mm in general)
Supports: Tree Thin
The author marked this model as their own original creation.
