Compact Full Size Darts Case/Shell (soft tip)

Want something simpler than assembling your darts every time you want to play?

This is it, just slide the darts in or out whenever you feel like playing.

• The case was designed with 3d printing in mind of course.
• You can add a rubber band to keep the darts more securely in place, especially if printed in a softer material that might wear out over time.
• There are additional clips to hold the rubber band tight against the darts if you choose to add one.
• Darts slide in under the rubber band, no need to lift it up manually
• Thinner darts will stay centered as well due to the tip shaped hole inside of the print, and the flights take care of the rear end
• Darts slide in smoothly, and stay firmly in place when a rubber band is added
• No need to remove tips or flights, actually, the design almost relies on it when it comes to smaller darts

Designed this because the original case the darts came with fell apart from vibrations (commuting on a scooter), i'll include the step file in case you want to modify the design to perfectly fit your darts, shell is at least 2mm thick at every point, so there's wiggle room if you have thicker darts

Plans for a future version in case there's interest for the model (leave a comment): 

• Storage for extra tips (probably 3 or 4 extra tips)
• Storage for extra flights (either 3 or 6 extra flights)
• Dedicated mounting and/or transport clips/loops
• Multiple variants for specific dart sizes if needed