Improved Cherry MX Compatible Flat Top Keycap

Rebuilt and improved upon @JoshPeddle_593948 's model.

1. Higher polycount / detail
2. Strong stem
3. Reduced wobble
4. Inset stem slightly for improved look

Print recommendations:

• Print keycap face down on build plate
• 0.2mm nozzle or 0.4mm nozzle with Arachne wall generation
• Any layer height works, but recommend 0.10 - 0.16 mm for more detail

Little dot on the stem goes in the front-right corner when flipped as the stem is wider horizontally.

1. Fully rebuilt the keycap to fix lack of detail in the original file.
2. Increased the durability and stability of the stem.