Nerf CycloneShock Cylinder - Elite 3-Shot Conversion
Description
PDFPrinted on a MK3S 0.2mm Quality, (@ 50% speed but I recently had a blob monster of plastic). During 80% printing, I was having issues with y-axis crashing, and the print would become misaligned.
15% Infill, Organic Paint-On Supports, see image.
Inner Diameter of Barrels is 13mm
Disassemble the Blaster and replace the original cylinder. Modify the Blaster shell for Barrel Clearance. I opted to remove the entire top half of the barrel (see image) but Youtuber Captain Xavier increased the inner diameter of the barrel when reviewing https://www.thingiverse.com/thing:2906853 via
.
Model origin
The author remixed this model.
Differences of the remix compared to the original
Utilized https://www.thingiverse.com/thing:1658900 as the base model.
The orientation of the 3-Shot Barrel was inspired by https://www.thingiverse.com/thing:2906853.
The “primer” area at the rear end of the print, fits the mold of the CycloneShock's air restrictor, branching out to the 3 Barrels housing the darts.
There's a dart guide via Fillet so that you can keep track of which volley will fire.