WE P226/F226 RMR adapter, base plate

Adapter plate to mount aliexpress style RMR on your WE Sig P226/F226. 

I recommend printing at 0.1mm layer height, 4-5 perimeters and high infill. For assembling the plate to your pistol, you use two M2x16 screws and two M2 nuts. To put the RMR on in, first you need to tap M3 thread in the part and then use two M3x14 countersunk screws. I've decided to go this way as this gives the possibility to make the part robust and at the same time quite slim. 

Recommended material: ABS, ASA, PC, PACF. PLA will work but make the threads extra slowly with lubrication and don't leave your replica laying in the sun :) I've used PACF at high speed, gives a nice texture.

I also have a version for a genuine Trijicon RMR and a version with reloading grip just for fun, I can upload it if you need it.