Magnet Fire Alarm Adapter Holder

Magnet Fire Alarm Adapter Holder

Because I did not want to drill a hole into 2 metal racks to attach a fire alarm in each one, I made this little magnet fire alarm adapter holder plate.

Parts needed:

• 1x Fire alarm used with 74mm screw holes
• 1x Magnet with an M4 countersunk screw hole and Ø31mm and 4.5mm thickness
• 1x M4x12 countersunk screw and nut
• 2x M3x12 screw and nut

Printing instructions:

• 0.2 speed profile
• No brim
• No supports
• Textured sheet used

Happy printing =)