Death Star Box (Ring Box)

I remixed a Death Star box and made it as a gift for somebody.

I scaled it up a bit, the inner diameter of the box is about 52 mm (the empty space in the box). I also repaired the file and thickened it a bit in areas that were too thin to print.

I drilled the hole of the hinge after printing and added a piece of filament that I melted at the ends so it stays in place. But you can also put in a nail or piece of metal.

I scaled it up a bit, the inner diameter of the box is about 52 mm (the empty space in the box). I also repaired the file and thickened it a bit in areas that were too thin to print.