Guitar Pick Case Print in Place

This is a simple print in place guitar picks case with magnetic clasp. There are two versions: with or without an insert. The insert can hold 5 picks up to 2mm thick.

Printing Instructions (Standard):
I used PLA with 0.2mm layer height, 10% infill, 3 walls, and no supports. Print using the orientations provided.

The magnets used are 6x3mm. If requested, I can upload other sizes.

I have also included an optional decal on the top of the case with the Fender logo - or you can inscribe your own logo in the blank one.

Please comment with any questions or specific requests.

Happy Printing!