Ethernet Switch Wall Mount Bracket [DLink DES-105; 58mm Pitch, 3mm Studs]

A simple wall mount bracket for the 5 port ethernet switch DES-105 by DLink. It should fit other devices with keyhole shaped wallmount mechanism and 58mm pitch for 3mm (or less) studs).

I suggest printing at 100% infill to increase the strength of the studs. I designed them with an elliptical base shape to increase strength. However low infill can be too weak at the intersection to the base plate.

I attached it with VHB tape to the surface but you can easily drill some holes for attachment via screws.