pi-like-stack - stackable customizable raspberry raspi pi case stack scad openscad

pi-like-stack

Yet another way to stack pi-like or other SBCs (single board computers) on top of one another.

For a standard 40pin raspberry pi A/B or similar board you probably want full.stl

https://github.com/BreadMakesYouFull/pi-like-stack

The default board size is for 40-pin like A/B model mainline pi-like devices.
85mm x 56mm x 20mm, with standoffs 2.5mm diameter.

Each layer is 100mm x 75mm.

Printed without-support at 60% infill (PLA)

Requires

• Openscad (or use the pre-made STLs)

Quickstart

openscad ./pi_like_stack.scad

Print Settings

• Printer brand: Creality
• Printer: Ender 3 Pro
• Rafts: No
• Supports: No
• Resolution: 0.28mm
• Infill: 60
• Filament brand: DURAMIC 3D PLA+ Black
• Filament color:black
• Filament material: PLA / PLA+