AMD 4700S Desktop Kit Cooler 120mm fan adapter

Since there are no official aftermarket coolers for AMD 4700S Desktop Kit, or any 3d printable parts which could help do it with any other cooler. I decided to try something first myself.


I noticed that you can easily swap the 80mm fan with the one from AMD Wraith coolers (the one with AMD ring).
Later I found an interesting adapter from @solidusnak23_514132 which could adapt any 120mm case fan for the AMD Wraith / Spire coolers (if you run those coolers, I really recommend you to print it, it is a game changer) which sadly does not fit the AMD 4700S Desktop Kit - only because its radiator is like 1-1.5mm wider than the AMD Wraith coolers.

So based on his work, I decided to edit it a bit to make it fit.

I hope that people will find that usefull for their 4700S desktop kits :) 

Printed in ABS with 50% infill.

• around 1.5-2mm wider outer ring at the end (near the radiator)
• bigger “window” near the screw holes at the bottom so it would not interfere with the radiator