Micro Dice Tower (Blank, DnD, CoC)

A small (about UNO cards stack sized) dice tower with dice tray included. 

Both parts print without supports and use about 70 grams of filament.

HIGH ROLLS GUARANTEED*

The tower can fit a whole set of standard dice for storage. Put on the tray to keep them inside

The bumps on the tray and indents on the tower allow you to lock the tray to the tower in two positions. To close it after use and to lock it in place when using so the tower doesn't slide on the tray.

Ribs on the steps of the tower to make sure that your rolls will be thorough and random

For printers without multicolor printing, you can apply color change for a few layers to make the logo and bottom of the tray a different color (at 0.2 layer height It's for layers 3-7).

You can choose between a blank, Call of Cthulhu or Dungeons and Dragons versions. 

Make your own version by cutting any logo or text on the blank tower and tray

Recommended depth:

Tower: 0.25mm

Tray: 0.4mm

*not really, but my friends and I had some good luck while using those during our last Call of Cthulhu session :)