baofeng pouch

I needed some simple belt pouches for Baofeng radios. These fit radios such as the UV-B5, BF-888S, etc. The "button" file is for a button that can be CA glued to the pouch front if you want to add a loop of elastic cord onto the belt loop for retention purposes. I added such a loop to some of mine using CA glue & shrink tube to seal the ends together. Retention is decent even without the cord. The "b" versions have a small hole for anchoring an elastic loop.

These should be printed in a flexible filament, like TPU, for best results. No supports are required for printing.

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/6vqJzSzFBrT