LoRa/Meshtastic case

LoRa case with space for 2 Heltec Wireless Paper devices.

What is Meshtastic? Meshtastic® is a project that enables you to use inexpensive ($20) LoRa radios as a extreme low power, long range off-grid communication platform in areas without existing or reliable communications infrastructure. This project is 100% community driven and open source!

Use case examples: 
 

• One for 433 and one for 868 MHz (or what applies to your country).
• One for Long-Fast, one for Long-Slow
• One for 868 and one for 866 MHz
  
  
  Also space for 2 (3 with compromises) 10A batteries, 
  
  
  
  2 amplifiers 
  
  
  and a charging-circuit.
  
  

You need:

- inserts. 8x M2 and 4x M3
- 4x M3x16 bolts. Preferably with Philips-heads.
- Filament for the case and the front. Choose whatever you like.
- TPU 95A > For the back. You need to bend it in the back of the case, pinch the top and bottom with 2 fingers and than it clicks in place. Made to never fall out but easy to remove without tools. (See 3D renders).
- Ty-raps. This case is created to mount everything with Ty-raps. It's quick to mount! It's quick to remove/replace It's strong! It's clean! It's available everywhere! No special tools or skills needed. Besides, most boards (and batteries) don't have mounting holes in the first place.

If you think the front should be removable by hand instead of screws, let me know in the comments. But if I do, the front will be TPU also. (Oh I love this stuff so much :P)

The real pictures is a prototype with flaws which I removed in the uploaded version. New pica's will follow soon. The renders present reality. The way you are going to print it.

Happy printing!