ERCF v2 2020 Mounts

ERCF v2 2020 Mounts

These mounts are made for the ERCF v2 and they are able to mount it to the top of a single 2020 extrusion (bedslinger printers usually have this on the top of the printer).

BOM

• 6 x M3x8 SHCS
• 4 x M3 heat set inserts (Voron inserts recommended, M3x5x4)
• 2 x M3 T-Spring nuts
• 15g of ABS filament

Print settings

• ABS filament
• Layer height: 0.2mm
• Wall count: 4
• 5 top and bottom shell layers
• Infill: 40% grid, gyroid, honeycomb, triangle or cubic.
• No supports needed
• STLs are oriented in print direction

Assembly

1. Insert the heat set inserts from the top or the bottom for extra strength.
2. Align the mounts with the feet and srew the mounts into the T-Spring nuts.
3. Screw the feet of the ERCF into the mounts.
4. Done!

Neptune 4 Pro

These mounts were originally designed for the Neptune 4 Pro.

Left_Mount.stl is made specifically to fit onto the top of the N4P because of the short extrusion, but it fits longer 2020 extrusions as well.