Holy Pikachu Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Smart Recycled Black Transmission Distance: 0.5
PLA Smart Recycled Dark Green Transmission Distance: 3.8
PLA 3DFils Azul Electrico Transmission Distance: 3.8
PLA Smart Recycled Red Transmission Distance: 4.4
PLA Smart Recycled Yellow Transmission Distance: 9.3
PLA Smart Recycled White Transmission Distance: 5.7
This print uses 6 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Dark Green
At layer #10 (0.88mm) swap to Azul Electrico
At layer #11 (0.96mm) swap to Red
At layer #13 (1.12mm) swap to Yellow
At layer #23 (1.92mm) swap to White for the rest.