"Beam and Beyond" - Coasters

________________________________________________________________________________________________________
☀ If you want to sell prints of this model, as well as all of my models - future and past, become an Authorized Merchant member of my Patreon for a commercial license! ☀
______________________________________________________________________________________________________
The "Beam and Beyond" coaster captures a whimsical scene where the tranquility of nature meets the mystery of the cosmos. Set in a peaceful forested valley, a UFO shines a beam of light down onto a cozy campsite. This unique design is perfect for those who love the great outdoors with a touch of the fantastical, adding a splash of extraterrestrial charm to your space

For best results use 0.2 nozzle if possible, but 0.4 is also works great (The pictures show a model printed with a 0.4 nozzle)
The design allows for printing with simple color changes at layer, which saves a lot of filament!

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.
 
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA KINGROON Black Transmission Distance: 0.4
PLA Jayo Gray Transmission Distance: 2.1
PLA KINGROON Silver Transmission Distance: 1.9
PLA+ Jayo Sky Blue Transmission Distance: 4.4
PLA 3D Jake Dark Green Transmission Distance: 0.4
PLA 3D Jake Eco White Transmission Distance: 2.5
PLA KINGROON Orange Transmission Distance: 4.5
Color Pallete:

Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Gray
At layer #17 (1.44mm) swap to Silver
At layer #19 (1.6mm) swap to Sky Blue
At layer #23 (1.92mm) swap to Dark Green
At layer #26 (2.16mm) swap to White
At layer #30 (2.48mm) swap to Orange for the rest.