(Parametric) Round Plant Pot Drip Tray

A drip tray so simple that you could model this yourself in just 5 minutes.
It is parametric, down to the last detail, so it is suitable for any and all round plant pots.

I recommend having at least 4 top layers and 3 walls, to make sure water cannot seep into the infill. Increase flow by 5 - 10% to fill any gaps between walls.

Original Measurements are for a pot with 60mm diameter.

Parameter Guide:

PotDiameter - the diameter of the base of your pot

BaseThickness - thickness of the bottom of the tray (dont recommend going smaller than 2mm)

LipThickness - Thickness of the round bit around the sides

LipHeight - Height of the round bit around the sides

Spacing - Extra space between the bottom of the pot and lip (useful to avoid a tight fit)