KM4CFT CFT1 5 Band CW Field Transceiver - Printed Parts

3D printed parts for the CFT1 5-Band CW Field Transceiver.

Recommended to be printed in PETG. Supports are not needed for any of these parts, but supports on the center perimeter arch might be beneficial due to the long bridging move.

VFO and Volume Knob can be printed as-is, but the volume knob can also be done with MMU to get the marking. Use 3MF file to get the MMU design.

Buy the CFT1 kit at https://hamgadgets.com/cft1-by-km4cft.html 

Assembly Manual, Schematics and Owner's Manual Can be found at https://hamgadgets.com/pdf