Peg Board Basket 1" inch
Peg board (1 inch) basket with small windows in front and rear.
2
15
0
77
updated August 3, 2024
Description
PDFThe pegs print better with support (20% line), but you really shouldn't need support for top oval section of windows. I don't suggest my print speed, I would tone it down to 75mm/s, I had a lot of stringing at this speed.
Basket Specs:
The total depth from front to pegboard is 32mm, and wall thickness is 1.2mm.
| Description | Inner (mm) | Outer (mm) |
| Width | 83.6 | 86 |
| Height | 100 | 102.4 |
| Depth (basket) | 25.6 | 28 |
| Printer Setting | Value |
| Print Speed | 100 mm/s |
| Travel Speed | 150 mm/s |
| Build Plate Temp | 50 C |
| Infill | 20% |
| Fan Speed | 20% |
| Layer Height | 0.20 mm |
| Print Temperature | 220 C |
| Material | Overture PLA |
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Utilized single peg model designed by Amos491 and attached two to an assembly for a basket that I designed.
