EEW 6.0 Bobbin Winder for 8mm bar
Modified EEW 6.0 Bobbin Winder for an 8mm metal bar
5
16
0
176
actualizado
3 de agosto de 2024
Descripción
PDFModified Maurice's EEW 6.0 Bobbin Winder accessory for an 8mm metal bar (rather than 1/4inch) Uses the same bearings with an additional shim for the R6.
Etiquetas
Origen del modelo
El autor ha hecho un remix de este modelo.
Diferencias del remix respecto al original
Modified Maurice's EEW 6.0 Bobbin Winder accessory for an 8mm metal bar (rather than 1/4inch) Uses the same bearings with an additional shim for the R6.