AA and AAA battery dispensor with backpocket

AA and AAA battery dispensor with backpocket to hold a charger/tools.

Printing on the BL P1P took 2h 26m at normal speed using 0.2mm layers with 0.4mm nozzle.

Consumes approx. 110g of material. I used a 15% sparse rectilinear pattern infill.

STEP, F3D and 3MF files included.

I've increased the size of the back pocket to fit larger chargers such as the Youshiko YC6500 and similar models that exist.

The backpocket now measures 115mm wide x 36mm deep x 30mm high.

I also filleted the corners a little so the printer doesn't have to make lots of sharp 90 turns on the first layer which might help some printers.