Yoto Mini Truck

Print a truck to both protect your Yoto Mini and turn it into a working toy!

Print and assembly are pretty straight-forward. You will need to print the following:

1x TruckBody

2x Axle

4x AlignmentPeg (there are holes to accommodate the pegs on the axles and body)

4x Wheel

4x Tire

4x WheelLock (these slot into the center of the wheels after assembly to keep them attached)

The 3MF files already have the required amount of each part.

You will need superglue or whatever adhesive you prefer but no screws or any other hardware.

Note: Since I last took pictures there was a small addition. I added card slots to the bed of the truck so that cards can stand up in the bed.