Parametric Plant-in-Place-Holder / Straightner / Support

Fully customizable support arm for plants.

Instructions:

1. Open the .f3d-file in Fusion360
2. Click Design > Solid > Modify > Change Parameters . The Parameters dialog displays.
3. Fill in 'PotDiameter' - 'PotRimWidth' - ‘PlantStemWidth’
4. Save as .3mf and load into your Slicer.

I have attached a print file for a pot with 185mm diameter, 8mm rim width and 20mm plant stem.

Printing profile:

PLA / PETG

3 perimeters (0,4 nozzle)

20% infill

no supports

Filament used: GEEETECH Silver PLA