PETLIBRO DockStream Fountain Splash Guard

16Nov2024 - Uploaded V2 model which has a shorter front wall and deeper cut to the rear with a larger radii up to the top.

This was created to provide a splash guard to the PETLIBRO DockStream pet water fountain in order to prevent water from splashing out around the fountain while your pet is drinking.

The splash guard sits on top of the fountain and can be easily removed during cleaning maintaining the fountains easy cleaning benefits.  The splash guard does not sit in the water at all and will only contact the water drops splashing as your pet drinks.

Since making and installing this I have no longer had any issues with water outside the fountain and between the fountain and dock.

This was made and tested in the PETLIBRO DockStream fountain with the stainless steel pan.

Print with supports on in order to get the bottom lip printed which engages slightly into the pan.  I printed in White PETG with a layer height of 0.2mm and 20% infill thought 15% would be just fine.