Neptune 3/4 screen stand - free standing

This Screen Stand mounts using the stock 3 screw + 1 from the magnet on the back. Align the part and you will see where all the screws need to go. That way this stand is hold securely on both side. 

There are 3 version available - both leg, left leg, right leg. Single leg allows you to position the Screen in Front of the machine to save space on the side.

The Front lower Section will need support if you are not confident bridging ~60mm. The rest prints support free. Recommended 4 Walls, 4 toplayer, 3 bottom Layer.

-----
Feel free to buymeacoffee.com/lamarc