Stool - Adapter to make a Stool or Side Table

Build List:

3x Printed Adapters

3x Wooden Dowels (1.5 in Diameter)

1x Wooden Circle (15 in Diameter)

24x Wood Screws (Cabinets Screws 8 x 1-1/4")

Instructions:

1. Print the Adapters 
2. Cut the Wooden Dowels to the desired length (I used a hand saw)
3. Slide the dowels into each leg and pre-drill the holes into the legs, using the adapters as a guide
4. Screw the adapters to the legs before attaching to the Wooden Circle
5. With your assembled legs, mark and pre-drill into your wooden circle
6. Attach the assembled legs to the wooden circle, making sure to have the legs leaning outwards
   1. There is a little nub sticking out of the adapter (shown in photo) that point inwards to the center of the wooden circle. Use those to align the legs in the correct orientation.
7. (Optional) PAINT TIME
   1. You can paint or stain your finished product to customize it how you want!

Stool: Legs should be 22-25 inches long

Side table: Legs should be 15-20 inches long 

These heights might vary a little bit depending on the exact spot that you need them to go. I used mine for my kitchen countertop bar area and the legs are 23 inches long.