I designed this model after the feet of my computer case (Corsair Carbide Spec 01 ) broke and there was no option to buy a new one. I prepared two versions. Both versions fit seamlessly with the case. The V1 version is identical in dimensions to the original product, so there is no problem with compatibility with the case, but it shows low socket strength due to layer separation. This issue can be resolved by changing the printing direction of the product. However, since my printer couldn't handle the support settings in this way, I decided to design the V2 model. In the V2 model, I widened the back of the sockets. While this slightly reduced their flexibility, it still showed seamless compatibility and became extremely resistant to breaking.
Printing can be done without support at 0.2 mm layer height and 150mm/s speed. At least %40 infill is recommended. It has been tested with PLA and PETG, and it functions without issues.
Test image is white Pla plus ESUN with 0.32mm layer height. My final product is 0.2 mm height PETG (generic).
The author marked this model as their own original creation.