Japanese Wave - Filament Painting (Hueforge)

_______________________________________________________________________________________________________
☀ If you want to sell prints of this model, as well as all of my models, future and past, become a member of my Patreon for a commercial license! ☀
_______________________________________________________________________________________________________

"Japanese Wave" in the traditional style of “Under the Wave off Kanagawa” 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA Kingroon Black Transmission Distance: 0.4

PLA KINGROON Blue Transmission Distance: 4

PLA+ Jayo Mint Green Transmission Distance: 4.5

PLA+ Jayo Sky Blue Transmission Distance: 4.4

PLA Jayo Matte White Transmission Distance: 4.6

PLA KINGROON Red Transmission Distance: 4

PLA KINGROON Yellow Transmission Distance: 6
 

Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Blue
At layer #14 (1.2mm) swap to Mint Green
At layer #17 (1.44mm) swap to Sky Blue
At layer #18 (1.52mm) swap to White
At layer #26 (2.16mm) swap to Black
At layer #27 (2.24mm) swap to Red
At layer #32 (2.64mm) swap to Yellow for the rest.

If you like my work, drop me a follow!🤜🤛