City of Kings Organizer - KS Deluxe / Sleeved / Big Box / All Expansions

This organizer holds all official content available as of March 2019.
5
16
2
239
updated March 1, 2022

Description

PDF

This organizer holds all official content available as of March 2019.

I downloaded and printed the City of Kings Monster Stat Bar Holder.

They were too tight for my three-player bars, so naturally, I remade them in Fusion 360 with thinner walls. This eventually lead to making a full organizer.

All of my cards are sleeved with Mayday premium, including the official Print and Play Scenarios and Stories. The organizer fits snugly into The Big Box alongside the Quick Setup Trays.

The "Scenario Card Holder with PnP.stl" file has plenty of room to hold the scenario cards and the official PnP story and scenarios. If you don't have those printed out, one of the Story card holders ("Story Card Holder2.stl") should be able to hold your scenario cards.

File Instructions
For all lids, I printed with 0 top and bottom layers with 15% honeycomb infill for the see-through pattern.

  • "Dice Box.stl" / "Dice Box Lids.stl" - Print one of each each set of dice you have.
  • "Creature Stat Bar Holder.stl" - Print 3 of these, one for each set of creature stat bars
  • "Standee Holder.stl" / "Standee Holder Lid.stl" - Print 2 of these, one for bosses and one for characters and pets
  • "Resource Box.stl" / "Resource Box Lid.stl" - Used to hold cardboard resource tokens
  • "Resource Box - Large.stl" / "Resource Box Lid - Large.stl" - Hold deluxe resources, they need to be organized, I may reprint this to simplify storage.
  • "Story Card Holder 1.stl" - Holds the base game story
  • "Story Card Holder 2.stl" - Print 2 of this, hold the expansion stories, print another if you don't have the official print and play stories/scenarios
  • "Scenario_Card_Holder_with_PnP.stl" - Print this for the more spacious Scenario holder that hold the official PnP cards.
  • Print one of each other model.
    If I left anything out, please feel free to ask.

    Update:
    It's been reported that the lids may be a bit snug. Please print a test lid before printing the full set. scaling up the X and Y by .5mm may be advisable if the lids are too tight.

Print instructions

Category: Toy & Game Accessories Print Settings

Printer Brand: Prusa

Printer: i3 MK3

Rafts: No

Supports: No

Resolution: .2mm

Infill: 15%

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License