Brake Caliper Tool

A tool of convenience..

Recommended printer settings for 0.4mm nozzle:

• Layer height: 0.2mm

• Perimeters: Minimum 4

• Bottom layers: Minimum 8

• Top layers: Minimum 8

• Perimeter width: 0.45mm

• External perimeter width: 0.45mm

• Infill: Not important

I would love to hear your feedback if you print and use this tool, as it might help others as well.

I printed mine with PETG, but a harder filament would likely be better, such as PCCF, PACF, ASA, ABS, or even PLA..