Design cutting board stand

Design cutting board stand.

The design is parametric and takes height (see drawing) of the board into account so that the stand is not wobbly.

            +----------------------+        +-+
            |                                  |         |   |
height |                                  |         |   |
            |                                  |         |   |
            +----------------------+        +-+
                         width                 thickness

Different sizes available for different thicknesses of boards. Take the next biggest size to fit your board.

There is a 1.5mm clearance between the board thickness and the slot thickness.

If your needs are not fulfilled:

• use the f3d (fusion360) source file to change according to your needs.
• just leave me a message and I'll export it for you.

Printed with following parameters it took a bit over 1h15 on my printer (JGAurora A1)

• PLA+ (JAYO Black)
• 0.4mm nozzle
• 0.2mm layers
• 3-4 perimeters
• 5 layers top bottom
• 20% infill grid
• Mouse ears for the feet (optional, but helps with adhesion)

Edit 02.08.2024:
I changed the design dimensions a bit, it was unstable due to an error in the calculation.