4150 Holley Carb Spacer

This is a 3D printable open plenum Carburetor spacer.
It fits square bore intake manifolds, for a 4150 carburetor.

I made 4 different versions-
1" spacer with & without a 1/4" NPT vacuum port
2" spacer with & without a 1/4" NPT vacuum port

This should be printed using a Higher Temp filament
At lease a 100 deg C glass transition temperature (PTEG, ABS, Nylon, ect...)

PLA is not suitable for engine parts, melting temp is too low.

Custom Logos Available