GPU anti-sag stand

A simple GPU anti-sag stand with metal parts for durability and reusability. It's fairly small, designed not to steal the show, and keeps airflow unrestricted.

Printing:

Standard PLA printed in the orientation it will stand after assembly.

Parts & Gear:

• 1x M3x10 Allen bolt
• 2x M3 nuts
• Magnet, 6mm diameter and 3mm thickness
• M3 threaded insert (ruthex)
• Felt pad
• Superglue
• Soldering iron

Assembly:

1. Insert the threaded insert into the stand part from the top.
2. Insert the magnet with some superglue at the bottom of the stand part.
3. Place an M3 nut into the bottom of the tip part.
4. Screw another M3 nut onto the bolt below to lock the height by torquing it against the threaded insert.
5. Glue the felt pad on top of the tip part to cover the Allen bolt.
6. Finally, screw the tip into the threaded insert.