Miyoo A30 Front Plate Mod

This front plate is if you want to further customize the look and feel of your A30 without messing with the silhouette of the device that much! Add a nice texture with a textured PEI build plate, or use a patterned plate such as carbon fiber one to give a new look.

BUY THIS PRINTED DIRECTLY FROM MY ETSY HERE

Alternatively, I sell the adhesive by itself in case you want an even coat of non permanent adhesive under the plate. Otherwise, a stronger glue such as superglue (CAUTION: ESSENTIALLY PERMANENT) or a bunch of double sided tape should work well!

This is an easy print as long as your printer has a great first layer. If not, it may look kinda bad. Try to go for a bit of over-extrusion on the first layer if you are manually tuning your printer.

Print Settings

• The bottom of the print should be the front of the device
  
• Layer Height - 0.16 mm (smaller layer heights 
• Seams - use the seam painting tool to not put seams near thinner parts of the model, use this image as an example