Miyoo A30 Front Plate Mod (Stick Delete)

This is one of my more controversial mods, but allows for a lot of options for customization! Add a decal where the stick is or change the color scheme of your A30 altogether. 

This is an easy print as long as your printer has a great first layer. If not, it may look kinda bad. Try to go for a bit of over-extrusion on the first layer if you are manually tuning your printer.

Print Settings

• The bottom of the print should be the front of the device
  
• Layer Height - 0.16 mm (smaller layer heights 
• Seams - use the seam painting tool to not put seams near thinner parts of the model, use this image as an example
  
  
   

BUY THIS PRINTED DIRECTLY FROM MY ETSY HERE

Alternatively, I sell the adhesive by itself in case you want an even coat of non permanent adhesive under the plate. Otherwise, a stronger glue such as superglue or a bunch of double sided tape should work well!