Sovol SV08 Speed Adjustment for Motherboard and PSU Fan

Mod for adjustable Motherboard and PSU fan depending on the Mainboard temperature.

use my printer.cfg or do the changes by yourself.

YOU DO ALL OF THIS CHANGES AT YOUR OWN RISK! it works without Problems at my machine.

If you only use a Mainboard fan you can delete this part:

[temperature_fan fan4]
pin: PA2
kick_start_time: 0.5
max_power: 1.0
min_temp: 0
max_temp: 90
hardware_pwm: true
target_temp: 60
sensor_type: temperature_host
max_speed: 1.0
min_speed: 0.1
control: pid
pid_Kp: 2.0     ;40
pid_Ki: 5.0     ;0.2
pid_Kd: 0.5     ;0.1
pid_deriv_time: 2.0

If you use my PSU Fan mod you can let the config as it is.

https://www.printables.com/de/model/928574-sovol-sv08-ssrpsu-120mm-fan-cover-with-speed-adjus