Adjustable Pole Attachments (80mm Stem)

I first came upon this idea when I had to pass some things up to my wife in our loft / attic. I was originally just throwing up bags, when I thought there must be an easier and quicker method.

TA... DA.. The adjustable pole attachments were born.

I have 2 types of hooks, 2 types of flat plates and a washing line holder for good measure.

The single hook is used for lifting up refuse sacks etc; The double hook is used for shopping bags with handles; Both the flat plates are used in conjunction with my ladder to slide boxes up the ladder. (Make sure the box is sealed to make sure the bottom doesn't just give way); The washing line attachment speaks for itself... To hold up a washing line (if you still have one). There must be other uses for these attachments that I haven't even thought of.

There are 2 lengths of stem variants available in case you want a bit more sturdiness... 80mm and 100mm. The pole I am using is a standard alloy telescopic pole, but most adjustable poles are very similar, so it should fit most poles. I have included a 60mm test stem that you can print to see if it fits your pole first so that you don't waste any filament.

If the test stem doesn't fit your pole, then if you give me dimensions, a picture or description of differences to your pole head, then I will try to design an adaptor for your pole that could fit my stems (not guaranteed).

Do you want to be able to sell any or ALL of my prints shown here on Printables.com?
If so, then click on the 'buy me a coffee' link below, (or click here) and join one of my memberships. This gives you the option of a monthly, yearly or lifetime commercial license, along with a certificate and loyalty bonus models (both commercial and non-commercial). The non-commercial items are 3rd party models that may also interest you, all in one place.
The lifetime membership offers you unique commercial items not available to anyone else as well as all of the loyalty bonus models.

Please click the LIKE (Heart) Button if you like my models. If you REALLY like them, then please also buy me a coffee at the bottom of the page. Thank you.

Printing Instructions:

I printed these on my Creality CR-6 SE printer with Cura slicer 5.7.2 (Other printers/slicers can be used).

Material: PLA

Manufacturer: Prima Value

Colour: Light Grey

Resolution: 0.2

Nozzle: 0.4mm

Print Speed: 80mm/s (First layer @ 50mm/s)

Nozzle Temperature: 210 Degrees

Bed Temperature: 65 Degrees

Infill: 20%

Supports: No

Skirt: No / Optional

Brim: No / Optional

Raft: No / Optional

Enjoy.

                           https://www.buymeacoffee.com/tigertone