BMW E46 Floor jack puck
An adapter to go from a floor jack to the BMW E46 jacking points
6
31
0
368
updated July 29, 2024
Description
PDFModeled to fit the CATA CJ-2.5, not sure if it will fit any other models/brands, as I don't have any to compare to.
Print on very high infill, with bed temps above recommended to make sure the base is well bonded.
Do NOT print in PLA, I used PETG and it holds well, can try other filaments.
HIGHLY RECOMMENDED: Put your car on the jack for a night and see if it holds for the night.
Use this at your own risk and be very cautious.
Photos in preview are of a test print.
Model origin
The author marked this model as their own original creation.
