E3D Hemera XS V6 Mount (V6 Hotend) for Elegoo Neptune 4

Recommended Filament: ABS or ASA

Layerheight: 0,2 mm or lower 

Orientation: Lay down on the large flat side

Assembly Steps:

1. Insert Threaded Inserts ( 4  M3 ,  1 * M2)
2. Screw on Hemera XS
3. Screw on Probe
4. Screw on PCB with M2 Screw from Original Toolhead
5. Screw on the little Adapter(with the 3 threaded Inserts) from the Original Toolhead
6. Screw Adapter to original Printer Mount points

adjusted height of the probe, so that nozzle of V6 Hot-end reaches the Print-Sheet

modified the holes for threaded inserts for better fit

removed a bit of material so that the Pins of Elegoo Toolhead PCB does not touch the adapter anymore