Waylon The Dog

Project: Waylon.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x299.96mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Inland Masterspool Dark Grey Transmission Distance: 0.3
PLA Priline Grey Transmission Distance: 2.1
PLA Ender White Transmission Distance: 4.8
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Dark Grey
At layer #15 (1.28mm) swap to Grey
At layer #22 (1.84mm) swap to White for the rest.