This is an insert for the Harbour card game box from Tasty Minstrel Games (TMG)
Due to manufacturing fluctuations, resource blocks may fit a bit snug.
This insert is designed to support sleeved cards.
Note: If you plan to use this design, I'd recommend using a piece of card stock with a tab to place between this tray and the wharf cards to facilitate their removal.
EDIT: In retrospect, I think I'll end up swapping the resource and meeple sections to make resource removal easier (version 1.1, it also has an extra 1mm space for the resources and .5 mm for the meeples).
EDIT 2: Due to apparent manufacturing tolerances, I have added v1.2 with significantly narrowed walls allowing for increased token space. I have not printed v1.2 but see no reason it shouldn't work. Please let me know if it does or doesn't work for your copy of Harbour. Thanks
Edit 3: It seems like a newer version of Harbour has been released with a slightly smaller box, ver1.3 is as slimmed down as I can get the insert but, hopefully, it will do the job.
Printer: Monoprice Maker Select v2.1
Rafts: Doesn't Matter
Supports: No
Resolution: .200
Infill: 20%
Notes:
Printed in PLA
This is my first experiment with Fusion 360 (first 3D model ever in fact)..
The author marked this model as their own original creation. Imported from Thingiverse.