Version 0, started as a life-size sandbox prototype, finished as a toy
Considering the kids are ogres the goal was to make pieces easily replaceable
For reference pictured model is about 130mm long
10 printed pieces total -- parts list below
Model shown is using various length 2.5mm bolts with nuts -- specifics below
Bolt size and other parameters can be changed in the file
Standard print settings at 0.3mm layer with exception of rod and rod rings at 0.2
Working on improvements: (a) prevent bucket jamming when overstretched (b) different base board options (c) double the size
Feedback welcome
Parts List
(1) left arm
(1) right arm
(1) right handle
(1) bucket
(1) rod
(2) rod rings
(1) swivel base top
(1) swivel
(1) base board
(2) 16mm 2.5 bolt
(1) 20mm 2.5 bolt
(1) 5mm 2.5 bolt (to secure base to base board)
The author marked this model as their own original creation.