25 Cone Machine for Kingsize Cones - weed - Joint - 420

cforms 25 Cone Machine for kingsize weed joints

I recommend you to print the body with PLA or PETG and the lid and the placeholder with TPU.

How it

1. load the Cone-Machine with empty kingsize cones. If you want to process fewer than the 25 pieces, you can use the placeholder add-on to leave out holes (always 5 holes).

2. fill in enough tobacco-weed-mixture at the top (approx. 1.4 g mixture per joint) and close with the lid.

3. tap the Cone-Machine including lid 3-5 times on a surface.

4. remove the lid and, if necessary, transfer the remaining mixture into the cones until they are sufficiently filled and than place the lid under the cone machine so that the joints press upwards.

HAPPY SMOKING