DuckSpecSeat

This is a Racing seat designed to fit the rubber ducks found within Big Tree Tech merchandise.

printed to voron part spec:

Layer height: 0.2mm

• Extrusion width: 0.4mm, forced
• Infill percentage: 40% 
• Infill type: grid, gyroid, honeycomb, triangle, or cubic
• Wall count: 4
• Solid top/bottom layers: 5
• Supports: NONE
  
  you will need:
  1x fearless duck
  2-4x M3 heat inserts 
  2-4x M3x6 (M3x8 works too)
  2x zip ties (for seatbelts)
  
  (if using magnet adapter you will need 3 6x3 magnets)
  
  For the magnet adapter just add a pause to insert the magnets.
  
  -insert the heat inserts into the adapter,
  -attach seat to adapter with M3 fasteners,
  -attach duck and zip-tie into place (you'll need to remove it's squeaker) 
  -then slide over stepper motor.