Polestar cupholder and armrest
Double cupholder and armrest support for Polestar 2.
6
67
0
488
updated July 28, 2024
Description
PDFA few minor changes was made to the original model.
- When i first made the cupholder, I had very thin walls in some areas. One guy had put up some pictures of the location. I made the walls a bit thicker which fixed this issue.
- Made the “cup” part partly hollow to save some filament and print time.
- Made an assembly to make it a bit easier to print.
Print with the flat top part down.
Use 10-20% infill.
Support placement: Touching buildplate.
I also uploaded the parts separately if you prefer the original printing method.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
A few minor changes was made to the original model.
- When i first made the cupholder, I had very thin walls in some areas. One guy had put up some pictures of the location. I made the walls a bit thicker which fixed this issue.
- Made the “cup” part partly hollow to save some filament and print time.
- Made an assembly to make it a bit easier to print.
Print with the flat top part down.
Use 10-20% infill.
Support placement: Touching buildplate.
I also uploaded the parts separately if you prefer the original printing method.
