Creality Sonic Pad Stand / Wallmount

This is a holder for the Creality Sonic Pad for wall mounting. For installation, high-strength double-sided tape is required.

There are two holes on the back for threading the cables.

The pad has a large distance from the wall to allow the cables to be routed to the back without bending too much.

Settings:

• No Supports
• Infill: 10% Lightning
• Layer height: 0,2 mm (or more)

Print time: 3.5 h on the Ender 3S1 

Requires at least 90-100g of material.