Pencil holder

Update (18.08.2024): In version v6 I have extended the bottom so that items in the “negative space” don't fall out when the pencil holder is lifted. I decreased the height of the object by 1 cm and it measures now 7 cm.

-------------------------------------------------------------------------------------------------------------

This print does neither require support nor MMU. With the given settings the height is 8 cm, its outer diameter is also 8 cm. To keep it sturdy, I made the walls and the bottom 2 mm strong. Infill: 20%. (10-15% would be more than enough though.) If you download the bgcode (with these exact settings), the printing time is 4h30 min. 

This pencil holder consists of one big compartment in the center and eight smaller outer compartments with a diameter of 15 mm each. The negative space offers more options for pencils or some other “flat” things not exceeding 8 mm like rulers or post-its. 

I would be very grateful for any constructive feedback and/or  ideas for improvement. Photos of your own prints highly appreciated! :-)